NEW YORK, Nov. 18, 2026 (GLOBE NEWSWIRE) — Cerium may not get the same attention as lithium, gold, or copper, but it plays an important role in industries that rely on advanced materials and specialized manufacturing. Used in automotive catalytic converters, glass polishing, petroleum refining, electronics, and specialty alloys, cerium has a wide range of established industrial applications. Demand is also being supported by emerging technologies and the push to strengthen domestic supplies of critical minerals. Grand View Research estimates the global cerium market was worth approximately $298.3 million in 2025 and could reach $419.9 million by 2033. Research and Markets offers a larger estimate, placing the market at approximately $692.18 million in 2024, with projections of $885.84 million by 2030. The difference reflects varying market definitions and research methodologies, but both forecasts point to continued commercial demand for this important rare earth element. Companies positioned to capitalize on the global push for critical rare earth minerals include: First Atlantic Nickel Corp. (OTCQB: FANCF) (TSX-V: FAN) (FSE: P210), MP Materials Corp. (NYSE: MP), Canada Nickel Company Inc. (OTCQX: CNIKF) (TSXV: CNC), TMC the metals company Inc. (NASDAQ: TMC), Talon Metals Corp. (TSX: TLO) (OTC: TLOFF).

The bigger story for investors may be where cerium comes from and who controls its supply. China remains a dominant force in rare earth mining and processing, creating growing interest in alternative sources throughout North America and other Western markets. MP Materials Corp. (NYSE: MP) is one company worth watching. Its Mountain Pass operation in California produces rare earth concentrate containing cerium alongside other rare earth elements. Cerium makes up approximately 50.2% of the rare earth oxide content in its typical bastnaesite concentrate. While MP Materials concentrates much of its commercial strategy on higher-value neodymium-praseodymium products, its operations demonstrate the importance of cerium within the broader rare earth supply chain. As manufacturers and governments look to reduce reliance on overseas suppliers, mining companies with quality rare earth deposits and the ability to process multiple valuable elements could attract increasing attention.

Key Cerium Mining Growth Drivers And Opportunities Include:

  • Expanding Industrial Demand: Growing use of cerium in automotive catalytic converters, glass polishing, electronics, specialty alloys, and industrial catalysts.
  • North American Supply Chain Development: Increasing government and industry efforts to reduce dependence on foreign rare earth mining, refining, and processing.
  • Clean Energy And Advanced Technologies: Emerging applications in fuel cells, energy storage, advanced ceramics, and other next-generation technologies.
  • Strategic Mining Opportunities: Greater interest in rare earth deposits containing cerium and other commercially valuable elements, creating opportunities for mining companies with promising resources and processing capabilities.

FIRST ATLANTIC NICKEL & COBALT ACHIEVES 98% NICKEL AND 82% COBALT EXTRACTION IN 20 MINUTES FROM PIPESTONE XL AWARUITE USING CERIUM REFINING, OUTPERFORMING TAMARACK NICKEL SULFIDE CONCENTRATE IN PEER-REVIEWED COLUMBIA UNIVERSITY RESEARCH FUNDED BY THE U.S. DEPARTMENT OF ENERGY ARPA-E MINER PROGRAM – First Atlantic Nickel & Cobalt Corp (TSXV: FAN) (OTCQB: FANCF) (FSE: P210) (“First Atlantic”) is pleased to announce that peer-reviewed research by Columbia University, published in ACS Sustainable Resource Management, extracted 98% of the nickel and 82% of the cobalt from awaruite (Ni-Fe-Co alloy) concentrate from the Company’s Pipestone XL Nickel-Cobalt Alloy Project in 20 minutes, using a recyclable cerium solution at room temperature with no smelting and no sulfuric acid pretreatment. Approximately 90% of the nickel was extracted within the first 5 minutes. The awaruite (Ni₃Fe) concentrate outperformed nickel sulfide concentrates from Talon Metals Corp.’s (TSX: TLO) (OTC: TLOFF) Tamarack Nickel-Copper Project in Minnesota, which reached 66.1% to 82.5% nickel extraction after 60 minutes: up to 48% more nickel extracted from awaruite in one-third of the time. The research was funded by the U.S. Department of Energy’s ARPA-E MINER program (grant DE-AR0001706), formerly directed by Dr. Douglas Wicks, now a Strategic Advisor to First Atlantic, and tested two RPM Zone samples supplied by the Company.

The rapid, near-total nickel extraction within 20 minutes indicates strong potential for First Atlantic to develop a vertically integrated nickel and cobalt supply chain in North America, shipping high-grade awaruite (Ni-Fe-Co alloy) concentrate averaging 67.4% nickel from the mine directly into downstream refining to produce Class 1 nickel metal or nickel sulfate (NiSO₄). Class 1 nickel is essential to North American superalloys for aerospace and defense, stainless steel, and electric vehicle batteries. The process offers an alternative to smelting, avoids sulfuric acid-based refining, and regenerates its cerium with electricity for reuse. Together with Columbia University as its Research Partner, First Atlantic is advancing cerium refining as a domestic refining option. In March 2026, the Company was accepted as a member of the Defense Industrial Base Consortium (DIBC) and applied under RPP-CM-26-01, “Domestic Processing Capabilities of Critical Minerals”, with Columbia University as a Research Partner. The Company anticipates further work and collaboration with Columbia University in the near future.

Cerium is the most abundant rare earth element. According to the U.S. Geological Survey, cerium oxide averaged US$1.71 per kilogram in 2025, making it one of the cheapest rare earths, and the cerium market is oversupplied. It is produced in the United States by MP Materials Corp. (NYSE: MP), the largest rare earth producer in the Western Hemisphere, at its Mountain Pass mine in California.

In its 2012 annual report on nickel, the U.S. Geological Survey stated: “The development of awaruite deposits in other parts of Canada may help alleviate any prolonged shortage of nickel concentrate. Awaruite, a natural iron-nickel alloy, is much easier to concentrate than pentlandite, the principal sulfide of nickel.”

COLUMBIA UNIVERSITY CERIUM REFINING RESULTS:

  • 98% nickel extraction in 20 minutes from Pipestone XL awaruite concentrate (97.5% and 98.1% in two cerium solutions)
  • Approximately 90% of the nickel extracted in the first 5 minutes
  • 82% cobalt extraction in 20 minutes
  • Up to 48% more nickel extracted in one-third of the time compared with Tamarack nickel sulfide concentrates (66.1% to 82.5% after 60 minutes)
  • Roughly one-quarter of the cerium consumed by the sulfide concentrates, and no hot sulfuric acid pretreatment, which the best-performing sulfide sample (84%) required
  • 77% nickel extraction from pre-flotation magnetic-only concentrate, with only 5.6% of the iron dissolved

CERIUM REFINING OF PIPESTONE XL AWARUITE: NO SULFURIC ACID PRETREATMENT REQUIRED – In Columbia University’s cerium refining process, the nickel is dissolved by cerium, not by sulfuric acid, and the cerium is regenerated with electricity and reused. Pipestone XL awaruite was leached directly, with no acid pretreatment. Columbia’s control tests confirmed that the cerium did the work: on the same awaruite concentrate, acid alone extracted only 8% of the nickel in 20 minutes and ferric iron only 38%, compared with 97.5% to 98.1% with cerium.

The Tamarack nickel sulfide samples behaved differently. The best sulfide result, 84% nickel extraction after 60 minutes, was reached only after the sample was first treated with hot sulfuric acid to remove iron sulfide (pyrrhotite). Without that pretreatment, the same Tamarack material reached 70.5%. Awaruite contains no sulfur, and cerium refining has the potential to greatly reduce the reliance on sulfuric acid that defines conventional nickel refining.

In the paper’s conclusions, the Columbia University authors state: “Awaruite-bearing feedstocks behaved differently from the sulfide concentrates and showed even more favorable cerium utilization. Cerium(IV) nitrate extracted 97.5 ± 0.5% of nickel from the awaruite concentrate within 20 min, while cerium(IV) sulfate reached 98.1 ± 0.5% nickel extraction over the same period. … Additionally, oxidative leaching effectively extracted cobalt from awaruite, with 82% of the cobalt leached after 20 min. The cerium consumption for awaruite-containing materials was approximately 3 mol cerium(IV) per mol of nickel, consistent with direct oxidation of the iron-nickel alloy and substantially lower than the demand observed for sulfide feedstocks. Even the pre-flotation awaruite-bearing material, which was magnetite-rich, reached 77% nickel extraction while only 5.6% of iron was leached, indicating strong phase selectivity and suggesting that magnetite remains largely inert during cerium(IV) leaching.”

The Columbia University authors also state: “For awaruite-bearing materials, the absence of sulfide oxidation enables rapid nickel dissolution with low cerium consumption, allowing beneficiation to be optimized for awaruite exposure and recovery rather than complete gangue rejection. At a projected production scale of 160 tonnes Ni per day, the calculated leach volume of approximately 104 m³ suggests that the fast awaruite leaching kinetics could be compatible with practical agitated-tank operation. Coupled with electrochemical regeneration of cerium(III) back to cerium(IV), this approach offers a closed-loop oxidative leaching strategy in which cerium acts as a recyclable redox mediator rather than a stoichiometric reagent.” CONTINUED… Read this and more news for First Atlantic Nickel at: https://www.fanickel.com/archive

Other recent developments in the mining industry include:

MP Materials Corp. (NYSE: MP) (“MP Materials” or the “Company”), recently announced financial and operational results for the three months ended September 30, 2026.

“MP Materials delivered a strong quarter of growth across production, sales, and earnings,” said James Litinsky, Founder, Chairman and CEO of MP Materials. “Most importantly, we completed the GM qualification process, with saleable magnet deliveries and revenue beginning in the fourth quarter. This milestone is the result of years of compounding capabilities across the MP platform and marks an inflection point for our business and mission.”

Talon Metals Corp. (TSX: TLO) (OTC: TLOFF) recently announced assay results from its ongoing exploration program at the Tamarack Nickel-Copper-Cobalt Project (“Tamarack Project”) in central Minnesota.

The results include the thickest 138 Zone mineralized interval reported to date, along with additional high-grade intersections and geophysical indications from step-out exploration near the Vault Zone.

Canada Nickel Company Inc. (TSXV: CNC) (OTCQX: CNIKF) recently announced that it has extended the repayment date of its loan facility (the “Loan”) originally announced February 6, 2026 with Auramet International, Inc. (“Auramet”) from November 9, 2026 to February 9, 2027. The loan amount has been reduced from the originally announced US$32 million to US$27,777,299 as a portion of the principal has been repaid.

Mark Selby, CEO and Director of Canada Nickel Company said: “I am pleased with this continued support from Auramet extending the facility in-line with our current expectations on completion of various financing initiatives. Despite a challenging nickel price environment, we continue to advance meaningful discussions with offtake and joint venture partners and several federal and provincial level government funding programs as we work towards a construction decision in 2027.”

TMC the metals company Inc. (Nasdaq: TMC), a leading developer of the world’s largest resource of critical metals essential to energy, defense, manufacturing and infrastructure, recently provided a corporate update and third quarter financial results for the period ended September 30, 2026.

Gerard Barron, Chairman & CEO of TMC, commented: “Our Commercial Recovery Permit application for USA-A is going through a thorough review at NOAA. Recent developments give us confidence that we could have the permit in hand by this time next year. Our focus is on being ready to mobilize for production directly after we receive it.

“Together with Allseas, we’re working to significantly reduce the capital required to bring Hidden Gem into production. Rather than targeting maximum production capacity from day one, we’re prioritizing speed to first production and a lower upfront investment, which is good news for TMC shareholders. Even at these lower initial volumes, we expect the operation to be EBITDA-positive in its first years.”

DISCLAIMER: FN Media (FNM) is a third party publisher and news dissemination service provider located in the U.S., which disseminates electronic information through multiple online media channels. FNM is NOT affiliated in any manner with any company mentioned herein. FNM and its affiliated companies are a news dissemination solutions provider and are NOT a registered broker/dealer/analyst/adviser, holds no investment licenses and may NOT sell, offer to sell or offer to buy any security. FNM’S market updates, news alerts and corporate profiles are NOT a solicitation or recommendation to buy, sell or hold securities. The material in this release is intended to be strictly informational and is NEVER to be construed or interpreted as research material. All readers are strongly urged to perform research and due diligence on their own and consult a licensed financial professional before considering any level of investing in stocks. All material included herein is republished content and details which were previously disseminated by the companies mentioned in this release. The companies mentioned herein have not reviewed or approved this article. FNM is not liable for any investment decisions by its readers or subscribers. Investors are cautioned that they may lose all or a portion of their investment when investing in stocks. For current services performed FNM was compensated twenty six hundred dollars for marketing, media and commentary coverage for First Atlantic Nickel Corp. by a non-affiliated third party. FNM HOLDS NO SHARES OF ANY COMPANY NAMED IN THIS RELEASE.

This release contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E the Securities Exchange Act of 1934, as amended and such forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. “Forward-looking statements” describe future expectations, plans, results, or strategies and are generally preceded by words such as “may”, “future”, “plan” or “planned”, “will” or “should”, “expected,” “anticipates”, “draft”, “eventually” or “projected”. You are cautioned that such statements are subject to a multitude of risks and uncertainties that could cause future circumstances, events, or results to differ materially from those projected in the forward-looking statements, including the risks that actual results may differ materially from those projected in the forward-looking statements as a result of various factors, and other risks identified in a company’s annual report on Form 10-K or 10-KSB and other filings made by such company with the Securities and Exchange Commission. You should consider these factors in evaluating the forward-looking statements included herein, and not place undue reliance on such statements. The forward-looking statements in this release are made as of the date hereof and FNM undertakes no obligation to update such statements.

Contact Information:

Media Contact email: editor@fnmediagroup.com – +1(561)486-1799 

SOURCE: FN Media


Primary Logo

Media gallery

About The Author